NCC Product Home   Please Contact us for pricing

 

Q1D Series
 

Delay on Make (Series Load)
Q1D Series
 
Logic Funtion
Logic Function Allows user to accurately set delay times up to 1023 seconds without time consuming trial and error adjustments.
Operating Logic: Upon application of input voltage, the delay starts. At the end of the time delay, the load is energized. Reset is accomplished by removing input voltage. Set the delay time by switching the appropriate combination of time values to the “ON” position.
Note: The load may be located on either side of the line
Features
  • UR File #E65038
  • Universal Input Voltage 24 - 240 VAC/DC
  • 100% Life Tested
  • 20:1 Maximum To Minimum Timing Ratio
  • Compact Size
  • Flame-Retardant and Solvent-Resistant Polyester Thermoplastic Housing
  • Time Delay From 1 to 1023 Seconds in 1 second increments
  • Solid-State Digital Timing
  • Low Cost
  • Superior Transient Protection
  • Made in U.S.A.
Specifications
Time Delay
Adjustment: 10 Position DIP switch.
Range: 1 to 1023 seconds in one second increments. Zero time setting is undefined.
Repeatability: ± 0.5% (0.25% typical) at constant temperature.
Accuracy:
         ± 10% of set time +0 .25 second.

Input
Operating Voltage: 24 to 240 VAC/DC ±10% (On DC models, unfiltered supply voltage must be full-wave rectified)
Frequency: 50/60 Hz

Output
Type: Solid-state, normally open series load
Rating: 1 amp. steady state maximum
Life: 100,000,000 operations		 Protection
Transient Voltage: 30 Joule Metal oxide varistor
Dielectric Breakdown: 3000 VAC, RMS, terminals
to mounting
Insulation Resistance: 100 megohms minimum
between terminals and case

Mechanical
Termination: .25" x .032" male fast-on terminals
Mounting: Surface mount with one #8 screw

Environmental
Storage Temperature: -40°C to 85°C
Operating Temperature: -40° to 85°C
Humidity: 95% relative