We've got the HOTS for Hakko, You should too!
 Click here for program details

Contact EMSCO for all your production needs.
Hakko Products - Hakko Pricing

Hakko FP-102 Soldering Station

Specifications - Tips - Accessories

Click on image for enlarged view
 

 The FP-102 soldering station delivers the same superior heat transfer and thermal recovery as the FM-202 and uses the same revolutionary quick-change composite tips as the FM-202.

P/N: FP102-01
 

The FUTURE PRODUCT FP-102 is a low cost, high performance
soldering station that delivers!

  • the iron has a unique cartridge and soft grip design that allows cartridges with different tips and removable ergonomic grips to be quickly and easily replaced 
  • built in patent pending heating element 
  • tip temperature can be changed without changing the tip 
  • four pre-set nominal soldering temperatures to choose from at the touch of a button 
  • over 75 tip configurations available 
  • once the tip temperature is set, it is “locked” into the system memory and cannot be changed without the lockout key card 
  • red ring LED in connector stays illuminated when the iron is hot (patent pending feature) 
  • will run the FM-2024 desoldering tool (coming in May '04) 
  • ESD-safe by design

Note: The FP-101 and the FP-102 share the same specifications and features and benefits with one exception: the FP-102 has the ability to operate the FM-2024 desoldering tool.

Specifications

Model Name FP-102
Part Number FP102-01
Power Consumption 75W
Nominal Temperature Ranges 6.5
~343°C
~650°F		 7.0
~371°C
~700°F		 7.5
~399°C
~750°F		 8.0
~427°C
~800°F
Temperature Stability ±5°C (±9°F) at idle temperature

Station

Output Voltage 24V
Outer Dimensions 120(L) x 93(W) x 140(H) mm
4.7(L) x 3.7(W) x 5.5(H) in.
Weight 1.4 kg (3.1 lbs.)

Soldering Iron

Power Consumption 70W (24V)
Tip-to-Ground Resistance Under 2 ohms
Tip-to-Ground Potential Under 2mV
Total Length (w/o cord) 188 mm (7.4 in.) with T7-D24 tip
Weight     (w/o cord) 30 g (0.067 lb./1.07 oz.) with T7-D24 tip
Cord 1.2m (4 ft.)

Tips

STANDARD Shape: Conical Type: Standard For FUTURE MODULE FM-202 For FUTURE PRODUCT FP-101/102
STANDARD Shape: Chisel Type: Standard For FUTURE MODULE FM-202 For FUTURE PRODUCT FP-101/102
SPECIAL APPLICATION Shape: Knife Type: Special Applications For FUTURE MODULE FM-202 For FUTURE PRODUCT FP-101/102

Additional Tips

Accessories
 
599-029

Cleaning wire for the 599B, 601. Made from coils of brass. Cleans the soldering iron tip without water! 
599B 

The HAKKO 599B tip cleaner is made from coils of brass. It cleans without water! Simply plunge (stab) the iron tip into the coils to clean the tip. The wire is softer than the tip plating yet harder than the oxidation that forms on the tip.

It will not reduce the tip temperature. A great alternative to the conventional damp sponge. May be used as a portable tool holder and cleaner
Replaceable cartridge for the 601 iron holder
634-01

Holder for FM2021 Iron 
634-02 

Holder for FM2021 Iron 
B2765C

Yellow, anti-bacterial grip for FM2021-02 connector 
B2768C

Orange, anti-bacterial grip for FM2021-02 connector 
B2769C

Blue, anti-bacterial grip for FM2021-02 connector