Contact EMSCO today to purchase your Fluke Digital Multimeter
and take advantage of the Lifetime Limited Warranty on selected models

Fluke Product Home

PAC91 Printer Adapter Cable

PAC91 Pricing

The PAC91 makes it possible to connect the output of Fluke test tools directly to widely-used parallel printer interfaces. The PAC91 converter has an optical RS-232 (serial) input and a parallel data (Centronics) output.

Features

  • Easy connection: Optical connector hooks directly to Fluke test tools with an optical interface
  • Standard, 25-pin connector for Centronics printer cable
  • Battery-powered for field use
  • Auto Power-off mode helps conserve batteries
  • "Busy" and "Power" indicator LED's
  • 9600 baud communication speed keeps up with fast printers

Specifications

  • Optical Input: Optical RS-232, 9600 baud, 8 bits, no parity, 1 stop bit, Xon/Xoff handshake.
  • Output: Centronics (TTL levels,), 8 bit parallel with handshake. DB-25 female connector.
  • Battery: Alkaline 9V, IEC 6LR61 (NEDA 1604). Battery lifetime >20 hrs. at room temperature.
  • Power switch settings: Off / Auto off / On. 'Auto off' mode gives auto power-down 5 minutes after last data transfer.
  • Dimensions: 123 x 76 x 30 mm (4.85 x 3 x 1.2 inch); cable length: 30 cm (1 ft).
  • Environmental: Temperature range 0°C to +50°C (operating), -40°C to +70°C (storage).
  • Warranty: 1 year
  • Supported instruments: ScopeMeter test tools, power harmonics analyzers and graphical multimeters.

Ordering Information

PAC91 Printer Adapter Cable, optical to Centronics