Contact EMSCO today to purchase your Fluke Digital Multimeter
and take advantage of the Lifetime Limited Warranty on selected models

Fluke Product Home

Fluke Temperature Accessories

Temperature Accessories Pricing

Fast, High Accuracy Temperature Measurements Two Ways

1. Convert any DMM with a 10M Ohms input into a thermometer by using any of the following:

2. Boost the capability of Fluke's Model 51 and 52 Digital Thermometers with:

  • 80PK-IR Infrared Temperature Probe
  • A versatile array of 8 Temperature Probes (80PK-1 through 8PK-8) to suit a wide range of applications.

Non-Contact Infrared Temperature Probes

80PK-IR (for Thermometers only)

80T-IR (for DMMs)

  • Instantly measures temperature from -18°C to 260°C (0 to 500°F) without contact
  • Highly repeatable readings
  • Senses and converts infrared energy emitted from an object into a signal readable on a DMM, or Digital Thermometer display
  • Results displayed in °C or °F: 1 mV dc per °C or °F output
  • Automatic shut-off after 10 minutes of operation saves battery life

Specifications

  • Temperature Range: -18°C to 260°C (0°F to 500°F)
  • Accuracy: +/-3% of reading or +/-3°C (+/-5°F), whichever is greater, 18°C to 28°C (64°F to 82°F) ambient operating temperature
  • Temperature Coefficient: 0.2% of reading or +/-0.2°C (+/-0.3°F), whichever is greater, change in accuracy per degree change in ambient temperature above 28°C (82°F) or below 18°C (64°F)
  • Response Time: 1 second
  • Emissivity: Fixed at .95
  • Output: 80PK-IR, Type-K thermocouple mini-connector 80T-IR: 1 mV per °C or °F (Switchable)
  • Operating Temperature: 0°C to 65°C (32°F to 150°F)
  • Resolution: 1°C or °F
  • Optical Resolution: 4:1 distance to target ratio
  • Power: 9V battery
  • Size: (L x W x H) 180mm x 30mm x 50mm (7.1" x 1.2" x 2")
  • Weight: 180g (6.4 oz)
  • Warranty: 1 Year

Compatibility:

80PK-IR:
 Any Type-K thermometer or other temperature measuring device that accepts Type-K standard mini-connector inputs (Including the 80TK Thermocouple Module, allowing DMM compatibility).

80T-IR:
Any DMM or GMM with 10 M Ohms input impedance, standard diameter banana jacks, and mV dc capability.

  • Ideal for maintenance applications where object to be measured is hazardous to touch, is moving, easily contaminated, or difficult to reach

80TK Thermocouple Module

Compatible with any DMM having 10M Ohms or greater input impedance and a mV dc scale.

  • Converts any Fluke DMM to a thermometer via standard banana plugs. (Not required for Model 51 and 52)
  • Uses Type-K thermocouples with mini-connectors
  • Switch selectable for °C or °F
  • Low-cost, powered by standard 9V battery
  • Battery test instructions included

Specifications

Measurement Range: -50°C to 1000°C (-58°F to 1832°F), depending on thermocouple probe used.

Accuracy:

-50°C to -20°C: 2.5% +/- 2°C 350°C to 500°C: 1.75% +/- 2°C
-58°F to -4.0°F: 2.5% +/- 3.6°F 662°F to 932°F: 1.75% +/- 3.6°F
-20°C to 350°C: 0.5% +/- 2°C 500°C to 1000°C: 2% +/- 2°C
-40°F to 662°F: 0.5% +/- 3.6°F 932°F to 1832°F: 2% +/- 3.6°F
  • Use with interchangeable 80PK-1 through 80PK-8 probes (one 80PK-1 Bead Probe included)

80T-150U Universal Temperature Probe (DMM only)

Compatible with all Fluke DMMs and most popular DMMs

  • High accuracy temperature probe suitable for air, surface, and non-corrosive liquids
  • Fast responding
  • Switch selectable for °C or °F
  • Standard 9V battery
  • Battery test instructions included

Specifications

  • Electrical Protection: 350V dc or peak ac (for electronics applications)
  • Range: -50°C to 150°C (-58°F to 302°F), cable 70°C (160°F) maximum
  • Output to Meter: 1 mV per °C or °F
  • Resolution: 0.1°C or 0.1°F on the 300 mV range of a 3-1/2-digit DMM
  • Accuracy: +/-1°C (1.8°F), 0°C to 100°C (32°F to 212°F), decreasing linearly to +/-3°C (5.4°F) at -50°C and +150°C (including nominal 0.25% voltmeter error).
  • Allows voltages up to 350V dc peak ac to be present on devices under test