The best meter in the world is of no use if you
can't make a proper test connection. Fluke's interchangeable test lead accessories offer a
wide variety of clips and probes. Use this accessories guide to determine the most
dependable test connections for your application.
TL24 and TL22 Interchangeable Test Leads
385 internal strands for flexibility prevent kinks
and bends in test leads; superior strain relief is also provided.
Silicone-insulated; won't crack from cold, or melt
from accidental contact with soldering iron.
Safety-designed with double insulation for added
protection.
All metal on banana plugs is capped and shrouded to
prevent accidental contact.
Compatible with all meters accepting
safety-shrouded, standard-sized banana plugs.
Test Probes and Clips
Made from a combination of high quality steel and
Polyamide plastic bodies for exceptional durability.
Safety-grip clips keep your hands a safe distance
from test connections-easy to use, even when wearing gloves.
Compatibility Guide
Probes & Clips with Test Leads
Same as TL22 except that one end has a shrouded,
straight connector.
Compatible with all DMMs that accept safety-shrouded standard-diameter banana plugs. TL22
or TL24 includes one red and one black lead. Silicone-insulated test leads have superior
flexibility and cold/heat resistance from -80°C to +150°C (-112°F to +302°F).
Withstands short exposure to soldering irons. Good chemical and tear resistance. Shrouded
right-angle connectors on both ends. Extra-long length of 63" (1.6m). 1000V per IEC
1010-2, Overvoltage Category III (Heavy Industrial Rating), 10A rating. One red, one
black. UL 1244 Listed.
Safety-grip, spring-loaded alligator clips with a
wide .787" (20 mm) jaw opening. 1000V per IEC 1010-2, Overvoltage Category III (Heavy
Industrial Rating), 10A rating. One red, one black. UL 1244 Listed.
Safety-grip, spring-loaded clips with nickel-plated
steel hook grip. Hook size is .400" x .080" (10 mm x 2 mm). 1000V per IEC
1010-2, Overvoltage Category III (Heavy Industrial Rating), 3A maximum. One red, one
black. UL 1244 Listed.
Safety-grip, spring-loaded pin-grabber hooks for
use with test points in close contact areas. Flexible shaft is 4" (100 mm), grabber
extends .375" (9.5 mm). 1000V per IEC 1010-1, Overvoltage Category III (Heavy
Industrial Rating), 1A rating. One red, one black. UL 1244 Listed.
Pierces 30 (.25 mm^2) to 14 AWG (1.5 mm^2)
insulated wires with an extremely small, hardened pin, to allow for maximum integrity of
the insulation. 1000V, 5A rating. A single probe per package. (For use only with shrouded
test leads having standard diameter banana plugs.)
Fully insulated banana-jack alligator clips. Extra
strong teeth and new spring design provide superior grip. Extremely rugged. Large
.787" (20 mm) opening. 600V per IEC 1010-2, Overvoltage Category III (Heavy
Industrial Rating), 10A rating. One red, one black. UL 1244 Listed.
Very sharp, extra-long .750" (19 mm) stainless
steel tip. For reaching deep test points or recessed components; will pierce insulation.
1000V per IEC 1010-2, Overvoltage Category III, (Heavy Industrial Rating), 10A rating. One
red, one black. Compatible with all test leads having standard, 4mm (.16"), diameter
banana plugs, with or without 8mm (.315") safety shrouds. UL 1244 Listed.
Designed for electronic probing of high density
components or boards. IC insulator cap prevents shorting of adjacent IC legs. Probe has
tapered .157" (4 mm) steel tip. 1000V, 10A rating. One red, one black.
Suggested for Electrical/HVAC applications. Set
consists of silicone-insulated TL22 Flexible Test Leads (one red and one black),
stainless-steel TP20 Industrial Test Probes (one red, one black), and AC20 Industrial
Alligator Clips (one red, one black). 1000V (Heavy Industrial Rating), Overvoltage
Category III per IEC 1010-2, 10A rating. Shrouded right-angle connectors. UL 3111-1
Listed.
Industry-standard for Telecom and Automotive
applications. 5 ways to connect: 1) U-shaped nose for blade-shaped terminals; 2) Notched
jaw for gripping screw heads, bare wire or terminals; 3) Serrated teeth for gripping
threaded or wire-wrapped terminals; 4) Cluster of sharp needles for piercing small gauge
(#22-#28 AWG) wires; 5) Large piercing needle for penetrating larger gauge wires. 60"
(1.5m), silicone-insulated leads, useable from -80°C to +150°C (-112°F to +302°F).
Rated for 250V, 10A. One red, one black.
Solid, spring-loaded copper clips with a wide
.50" (12.7 mm) jaw opening and serrated teeth. Large piercing needle for penetrating
larger gauge wires. 60" (1.5m), silicone-insulated leads, useable from -80°C to
+150°C (-112°F to +302°F). Rated for 250V, 10A. One red, one black.
Replacement test leads for all Fluke Handheld DMMs,
except 8060A, 8062A, and 860 Series. Comfort-grip probe with PVC-insulated leads. Super
strong tips and integral strain relief provide extended service life. Safety-shrouded,
right-angled inputs. For general purpose measurements; use TL70A for µV measurements.
48" (1.2m). 1000V, 10A. UL 3111-1 Listed.
Gold-plated, beryllium-copper, spring contacts
accept probe tips from .076" to .084" (1.93 mm to 2.13 mm). Standard jaw opening
of .313" (8 mm). 600V, 10A rating. One red, one black.
Compatibility Guide:
Test Leads With Meters
Model #
7 Series, 12B
20/70 Series
25/27
Model 76
80 Series
30/32/36
860 GMM
TL20^1^,^3
*
*
*
*
*
*
•
TL26
*
*
*
*
*
*
*
TL28
*
*
*
*
*
*
*
TL75^1
•
•
•
•
•
•
* Compatible and recommended
All accessories have a full 1-year warranty
• Comes with DMM or GMM (Standard with 867,
optional with 863 and 865)
^2 Factory Mutual Approved
^3 IEC 1010-1 CAT III - 1000 V
