The
Fluke-787 ProcessMeter™ combines
a DMM and a Loop Calibrator in one rugged, Handheld tool - for about what you would expect
to pay for a loop calibrator alone. The 787 starts with the Fluke-87 DMM you know and
trust, then adds ability to measure, source, and simulate DC loop current with 0.05%
accuracy and 1 micro-amp resolution. When you carry the ProcessMeter™, you're ready
for any loop troubleshooting or calibration task. And since it’s dust- and
splash-resistant and EMI-shielded, the 787 can survive in your tool belt. The Fluke model
787 ProcessMeter™ should be in your tool box, see the Comparison
Chart and FAQ/Information page for more details.
Features
DMM and loop calibrator in one tool
Precision 1000V, 440 mA digital Multimeter
Measure AC and DC volts,
AC and DC current, resistance, continuity, and
frequency
0.1% DC voltage accuracy
0.05% DC current accuracy, 1 uA resolution to 30 mA
Simultaneous mA and % of scale readout
True RMS AC voltage measurement to 1 kHz
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
DC current source / loop calibrator
20 mA current source / simulator
Simultaneous mA and % of scale readout
Manual Step (25%, Coarse, Fine) plus Auto Step and
Auto Ramp
Clear LCD with backlight; 4,000 counts (30,000
counts for DC current)
Externally accessible battery for easy battery
changes
V overload protection on V, ohms, frequency
V overload protection on mA, backed-up by 440 mA
1000V fuse
Designed to meet 1000 volt IEC 1010 Cat III
standards
Measurement
Function
Range and
Resolution
Best Accuracy
(% of reading +LSD
VDC
400.0 mV, 40.00 V,400.0 V, 1000 V
.01% +1
VAC (True RMS)
400.0m V, 40.00 V,400.0 V, 1000 V
.07% +4
mADC
30.000 mA
.05% +2
ADC
1.000 A (.0440A Continuous)
.02% +2
AAC
1.000 A (.0440A Continuous)
1% +2
Resistance
400.0 Ohms, 4.000K, 40.00K, 400.0K,
4.0M, 40M
.02% +1
Frequency (.05Hz to 20kHz)
199.99Hz, 1999.9Hz, 19.999kHz,
.005% +1
Diode Test
2.400V (shows diode voltage drop)
2% +1
Continuity
Beeps for resistance < approx. 100
ohms
N/A
Output
Output Function
Range and
Resolution
Drive Capability
Accuracy
(% of span)
DC Current Output
(Internal battery operation)
0.000 to 20.000 mA or 4.000 to 20.000
mA (selectable at power up)
Over-range to
24.000 mA
12 V Compliance, or 500 Ohms @ 20 mA
.05%
DC Current Simulate (Ext. 24Volt Loop
Supply)
0.000 to 20.000 mA or 4.000 to 20.000
mA (selectable at power up)
Over-range to
24.000 mA
1000 Ohms @ 20 mA
.05%
Current Adjustment Modes
Manual: Coarse, Fine, 25% step
Automatic: Slow ramp, Fast ramp, 25% step
N/A
N/A
Temperature range of 18° C to 28° C, for one year
after calibration
General Specifications:
Maximum voltage applied between any jack and Earth
Ground: 1000 V RMS
Storage Temperature: -40° C to 60° C
Operating Temperature: -20° C to 55° C
Temperature Coefficient: 0.05 x (specified accuracy)
per °C (for temperatures < 18° C or > 28° C)
Temperature Coefficient: 0.05 x (specified accuracy)
per °C (for temperatures < 18° C or > 28° C)
Relative Humidity: 95% up to 30° C; 75% up to 40°
C; 45% up to 50° C; 35% up to 55° C
Vibration: Random, 2g, 5-500 Hz.
Shock: 1 meter drop test
Safety: Designed in accordance with IEC 1010-1,
ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010..1-92 Over-voltage Category III
Size: 32 mm H x 87 mm W x 187 mm L (1.25 in H x 3.41
in W x 7.35 in L)
Size, with holster and Flex-Stand: 52 mm H x 98 mm W
x 201 mm L (2.06 in H x 3.86 in W x 7.93 in L)
Weight: 369 g (13 oz); with holster and Flex-Stand
638 g (22.5 oz)
Battery: Single 9V Alkaline battery (ANSI/NEDA 1604A
or IEC 6LR61)
