Specializing in high quality, cost-effective test and measurement products

B+K Product Home

Model 262 Tone Generator and Cable Tracer Kit

Pricing

B+K 260 and 261 Cable Tracer Kit The model 262 is a kit that combines the B+K Precision model 260 Tone Generator and model 261 Cable Tracer. (not sold separately)

Tone Generator model 260:
The Tone Generator is a hand-held, battery-powered instrument designed to perform a variety of tests on un-energized telephone lines or LAN cables. Alligator clips and a standard RJ11 plug allow the tone generator to be connected to stripped wires, terminal panels, wall plates, or modular single line jacks.

Cable Tracer model 261:
The Line Tracer is a hand-held inductive tracer that will help to identify wires without piercing the insulation. It can trace Tone Generator signals through dry wall, wood and many other non-metal surfaces.

 

Features

Tone Generator model 260:

  • Generates Warbled Tone with selectable test frequencies
  • LED indicates continuity when in CONTINUITY mode
  • LED indicates positive polarity when in POLARITY mode
  • Provides talk current on a dead line
  • Check line Polarity

Cable Tracer model 261:

  • Hi-gain, Hi-impedance amplifier
  • Capable of identifying tones up to 12 inches away (under ideal conditions)
  • Rugged, moisture resistant, Mylar cone speaker

Specifications

Tone Generator model 260

  • Tone Output Level: Approximately 8 vp-p (+3dBm, 600W).
  • Tone Output Current: Approximately 4 mA
  • Tone Frequency: 1.4KHz to 1KHz or 0.84KHz to 0.7KHz with switching freq. of 14Hz or 7Hz
  • Continuity / Talk Test: 35mA (leads shorted), approximately 6.5 VDC (leads open)
  • Dimensions (H x W x D): 7" x 1.87" x 1.12" (177.8 x 47.5 x 28.4 mm)
  • Weight: 5.8 oz. (164.4 g)
  • Power: Standard 9-volt battery

Cable Tracer model 261

  • Dimensions (H x W x D): 7.37" x 1.87" x 1.12" (187.1 x 47.5 x 28.4 mm)
  • Weight: 4.9 oz. (138.9 g)
  • Power: Standard 9-volt battery