The 230A tests thin Ethernet (BNC),
10BaseT (UTP/STP), 100BaseTx, RJ45, TIA-568A, TIA-568B, and Token Ring
cables within a few seconds. It detects mis-wiring, polarization, and
continuity. The 230A also tests the ground of shielded twisted pair cables.
With the remote unit, you can remotely test installed cable either from
the wall plate or patch panel.
Auto scans thin Ethernet (BNC),
10BaseT (UTP/STP), 100BaseTx, RJ45, 356A, TIA-568A, TIA-568B, and
Token Ring cables in seconds
Detects mis-wiring, polarization,
and continuity
Also tests the ground of
shielded twisted pair cables
Tests cables before or after
installation with the remote unit
LED display for clear indication
of problems
Model 231A
Deluxe Multi-Network Cable Tester
The 231A can easily read the correct
pin configuration of 10BaseT cable (category 5), 100BaseTx, 10Base2 cable
(coax) and RJ45/RJ11 modular cables, 356A, TIA-568A, TIA-568B and Token
Ring cables by comparing one transmitting end to the corresponding
receiving end.
With the remote kit, it can test cables installed far away
either on wall plate or patch panel up to 1000ft away. It is easy to
verify the cable continuity, open, short, and cross connect, featuring
auto or manual scan for pin-out indicators.
Tests 10BaseT, 100BaseTx,
10Base2, RJ45, RJ11, 356A, TIA-568A, TIA-568B, and Token Ring cables
Detects open, short, cross, and
continuity
Tests Point-to-Point, rather
than Pair-to-Pair
Quick and easy to use
Tests cables on wall plate or
patch panel up to 1000 ft away with the remote kit
