Specializing in high quality, cost-effective test and measurement products

B+K Product Home

1249B NTSC Color Generator

The 1249B is ideal for comprehensive testing, servicing and adjustment of video and television equipment, television receivers, video tape recorders, video monitors, closed circuit television systems and components, and master antenna systems and components.

 

  • NTSC color bar pattern, ±5 and ±5 IEEE units

  • CH 3, CH 4, and IF outputs crystal controlled

  • Calibrated 1Vpp or variable composite video output

  • RGB outputs on BNC or 9 pin D connector

  • Composite sync, vertical sync, and horizontal sync outputs

  • Interlaced or progressive scan 30 Hz signal is provided for isolation of servo problems in VCR's

Specifications

model 1249B

Color Bars White (75% or 100% switch selectable) Yellow, Cyan, Green, Magenta, Red, Blue, Black (7.5% set-up)
Chroma Switch Selectable
Accuracy +-5 0 and +-5 IEEE
Staircase COLOR OFF obtains staircase from color bars
Rasters Black
Window Does not apply
Convergence Center dot
  7 x 11 dots
  7 x 11 crosshatch
  Center Cross
RF Output Channels: CH 3, CH 4, 1F.
  61.25, 67.25, 45.75 MHz +- 0.008MHz
Level 10 mV rms minimum into 75 Ω
Impedance 75 Ω
Stability  
S-Video Does not apply
Composite Video 1V p-p into 75 Ω
  Negative or positive polarity sync available
Amplitude Variable 0 to +-1.2V p-p into 75 Ω
  Calibrated 1V p-p position with negative sync.
Impedance 75 Ω
RGB Output  
Patterns BNC and D-Type Sub-Miniature Connectors, convergence and color bars
Level TTL level and low level, (0.8 +- 0.2V), switch selectable
Impedance 75 Ω
Sound 4.5 MHz +- 0.2% modulated by approximately 1 kHz audio tone, switch selectable
Sync Outputs  
Composite NTSC-M TTL level; interlace for NTSC color bars and switch selectable interlace or progressive for convergence patterns (negative polarity sync)
Horizontal TTL level (Positive polarity sync.)
Vertical TTL level (Positive polarity sync.)
Impedance 75 Ω
Color Subcarrier NTSC signal: 3.579545 MHz (+50 Hz)
Power Source 105 to 130 VAC, 60Hz, 8W
Operating Temperature 32 0 to 122 0 F (0 0 to +50 0 C)
Dimensions 3.39 x 10.39 x 11.42'' (86 x 264 x 290 mm)
Weight 2.8 lbs. (1.3 kg)
One Year Warranty
Accessories
SUPPLIED: instruction Manual, 9V battery (1211E)
OPTIONAL: BE-12 AC adapter